DADAUX - CUTTER

Cutter Titane 200L

Titane 200 cutter is entirely made of AISI 304 stainless steel, lined on the inside with steel plate. The bowl is made of extra thick cast stainless steel (2 to 3 cm). The lid has a double thickness and is insulated. The rigidity of the framework and the quality of the bowl allow to blades to be adjusted very close by bowl. The clearance between the bowl and the lid is minimum allowing to do the fine stuffings in a short time, with a minimum heating of product. The lid and the framework don't have any angles that are ankward to clean. The controls are in low voltage (24 volts). Complies with EC standard.

Plan with overall dimensions

Cutter 200L

Zoom

Options : Graphic terminal for programmation

	Titane 200-9
Bowl motor power (HP)	2
Cutting blades speed (tr/min)	75 ou 100
Cutting blades speed (tr/min)	6 speeds 1000 to 4000
Mixing reverse blades speed (tr/min)	3 speeds 150 to 250
Bowl speed	4 à 18 With variator
Number of blades	6
Unloader	With
Thermometer	With
Length (mm)	2769
Width (mm)	2301
Weight (kg)	3600
Lids with hydraulic displacement	Yes
Hydraulic plant	4 CV

Head with 6 blades
Important thickness
of the bowl

Unloader with manoeuvre and hydraulic motor

Control board

Blades adjusted to 1mm from the bowl


Tightness joint between the bowl and the removal head for the cleaning	Different disks are avalaible for different products to drain off	Control box protected against water splashes under pressure